String and Module Assembly Workshop

Europe/Berlin
Building 130 / Room 52 (CEA-Saclay)

Building 130 / Room 52

CEA-Saclay

IRFU/SACM CEA-Saclay F-91191 Gif-sur-Yvette
Olivier Napoly (CEA)
Description
The scope of this workshop will be the one defined by the two XFEL Work Packages: WP3 “Module”, including cold mass fabrication and module assembly, and WP9 “String Assembly” including the clean room assembly of the cavity string. The goal of the Workshop is to prepare the Institutes responsible for the production of the XFEL cryomodules to the challenges of its industrialization. This Workshop will concentrate on technical issues; this will include reviewing: the state of the art for cryomodule assembly at DESY, Fermilab and KEK in terms of infrastructures, tooling and module handling the status of the CEA/Saclay proposal for cryomodule assembly the key technical operations, like cleaning, vacuum checking, cabling and connections, alignment, RF measurements the interfaces with the other work packages, notably Cavities (WP4), Couplers (WP5), Tuners (WP7) and Cold Vacuum (WP8) the organisation of the input, storage and flow of materials on the assembly site the quality control and the transfer of parts and responsibilities.
agenda
List of Participants
    • 13:30 14:00
      Welcome
      • 13:45
        Introduction and Objectives of the Worksop 15m
        Speaker: A. Daël
        Slides
    • 14:00 18:00
      String and Module Assembly Infrastructures
      • 14:00
        The Fermilab/ILCTA Assembly Infrastructures 45m
        Speaker: Tug Arkan
        Slides
      • 15:00
        The KEK/STF Assembly Infrastructures 45m
        Speaker: Norihito Ohuchi
        Slides
      • 16:00
        Coffee break 30m
      • 16:30
        Industrialisation of XFEL module assembly at CEA/Saclay 45m
        Speaker: Catherine Madec
        Slides
      • 17:30
        Discussions: critical choices, sequence of work stands and operations 30m
        Speaker: Marc Ross / Antoine Dael, conveners
    • 09:00 11:00
      String Assembly (WP9)
      • 09:00
        The future Clean Room at CEA/Saclay 45m
        Speaker: Stéphane Berry
        Slides
      • 09:50
        Discussions about Tooling, Procedures, and QC 10m
        Speaker: Axel Matheisen, convener
      • 10:00
        Cleaning 15m
        Speaker: Axel Matheisen
        Slides
      • 10:15
        Vacuum 15m
        Speaker: Helmut Remde
        Slides
      • 10:30
        Alignment 15m
        Speaker: Manuela Schmökel
        Slides
      • 10:45
        Control Operations 15m
        Speaker: Nicolaï Krupka
        Slides
    • 11:30 12:30
      Organisational Matters
      • 11:30
        EDMS folder organisation for WP3 20m
        Speaker: Serena Barbanotti
        Slides
      • 11:50
        EDMS folder organisation for WP9 20m
        Speaker: Stéphane Berry
        Paper
      • 12:10
        Discussions about EDMS 20m
    • 14:00 18:00
      Module Assembly (WP3)
      • 14:00
        Main challenges of assembly infrastructure 20m
        Speaker: Olivier Napoly
        Slides
      • 14:25
        Discussions about Tooling and Procedures 5m
        Speaker: Rolf Lange, convener
      • 14:30
        Vacuum 20m
        Speaker: Helmut Remde
        Slides
      • 14:50
        Alignment 20m
        Speaker: Kay Jensch
        Slides
      • 15:10
        RF measurement and tuning 20m
        Speaker: Denis Kostin
        Slides
      • 15:30
        Coupler Assembly 20m
        Speaker: Wolf-Dietrich Möller
        Slides
      • 15:50
        Cabling and quadrupole connections 20m
        Speaker: Wolfgang Maschmann
        Slides
      • 16:10
        Cold mass and module handling 20m
        Speaker: Tug Arkan
        Paper
        Slides
      • 16:55
        Discussions about Quality Control 5m
        Speaker: Kay Jensch, convener
      • 17:00
        Control operations for module assembly 20m
        Speaker: Kay Jensch
        Slides
      • 17:20
        Final controls and transfer of cryomodule 20m
        Speaker: Wolfgang Maschmann
      • 17:40
        Monitoring module transport 20m
        Speaker: Serena Barbanotti
        Slides
    • 09:00 10:30
      Interfaces
      • 09:00
        Introduction 15m
        Speaker: Catherine Madec
        Slides
      • 09:15
        WP5 Couplers 25m
        Speaker: Serge Prat
        Slides
      • 09:40
        WP6 HOM 25m
        Speaker: Wolf-Dietrich Möller
        Slides
      • 10:05
        WP7 Tuners 25m
        Speaker: Kay Jensch
        Slides
    • 11:00 12:30
      Closing