Conveners
Session 7
- Ian Shearer (VadaTech Ltd)
Prof.
Armin Reichold
(Oxford University), Mr
Ian Shearer
(VadaTech Ltd)
08/12/2016, 14:15
Applications in research facilities and industry
The MTCA.4 standard uses the concept of industry-generated AMCs and user-generated RTMs to provide economies of scale (for AMCs) and flexibility (via RTMs). For users new to MTCA, the overhead of designing to the RTM standard can be daunting, so a standard RTM accepting user-designed mezzanines has been produced. This first application of this is a collaboration between the University of...
Mr
Aleksander Mielczarek
(Lodz University of Technology)
08/12/2016, 14:30
Some physical phenomena can be conveniently analysed using just a single photo-element, others may require high-resolution cameras, but there is also a need for linear detectors. Such devices can offer a much higher frame rate than traditional cameras while still providing kilobytes of useful information per frame. Commercially available line cameras and sensors from leading manufacturers can...
Dr
Rong Liu
(Institute of High Energy Physics, Chinese Academy of Sciences(IHEP))
08/12/2016, 14:45
The ADS Proton Linac Injector I is composed of an ion source, a low energy beam transport line, a 325MHz radio-frequency quadrupole, a medium energy beam transport line, a superconducting linac and a beam dump. The Low-level RF control system(LLRF) of the test facility adopts a hardware platform based on MicroTCA.4. We have developed the LLRF firmware and applications and now completed a...
Mr
Matthias Werner
(DESY)
08/12/2016, 15:00
A Beam Charge Measurement system with a resolution of 0.2 pC RMS was developed for XFEL and FLASH/FLASH2. In addition, the system provides beam loss detection from differential measurements over optical fibers, based on the "bunchpattern" information provided by the Timing System.
This presentation will show the implementation in MicroTCA.4 with a Struck SIS8300L2D AMC, a special RTM and an...
