Simulation and Analysis TF


Topic: LUXE simulation and analysis TF
Meeting ID: 916 7025 7822
Password: 434044
Time: This is a recurring meeting Meet anytime

Join from PC, Mac, Linux, iOS or Android:

Or Telephone:
    Dial(for higher quality, dial a number based on your current location): 
        US: +1 206 337 9723  or +1 470 250 9358 
        United Kingdom: +44 131 460 1196  or +44 203 481 5237 
        Israel: +972 3 978 6688 
    Meeting ID: 916 7025 7822
    Password: 434044
    International numbers available:

Or an H.323/SIP room system:
    H.323: (US West) (US East) (India Mumbai) (India Hyderabad) (Amsterdam Netherlands) (Germany) (Australia) (Singapore) (Brazil) (Canada) (Japan)
    Meeting ID: 916 7025 7822
    Password: 434044

    Password: 434044

Or Skype for Business (Lync):

- cannot make the dipole volume larger (gap needs to be as small as possible).
- check how we talk about alignment of the calo and tracker (talk with Wofgang)
- Kyle - can now run FLUKA - just need the gdml model file from Sasha in the coming days

- managed to increase the last quadrupole gap to 1 m from the box —> can get to ~7-8 um
- Camera: screen impinged by the beam and a camera picturing it —> 
- BPM button?
- profiler just before the beam dump right after the IP ()
- wire-scanner before and after the IP is the best option —> maybe just one before the ip, inside the ICS chamber. —> Louis will follow up with Matt et al.
- could be dedicated runs so it can be a station which may be removed during most of the time.
- would not be easy to get the beam measurement from physics data
- should we monitor the temporal length of the bunch at the IP?   —> should not vary between bunches

- 10 um is OK, 15 is already problematic for large laser focus 

- need to check the energy spectrum of neutrons (increase binning) and check the Edep independently with a neutron gun.
- maybe need to have a polymer absorber between the Cherenkov and the dump (attached to the dump).

There are minutes attached to this event. Show them.