Conveners
Interoperability - further developments
- Andreas Werner (MPI f. Plasmaphysik)
Mr
Tony Rohlev
(TSR Engineering)
12/12/2013, 14:30
Interoperability - further developments
The DRTM-LOG1300 (uLOG) is a MTCA.4 compliant multi-channel local oscillator generator and high frequency signal and clock fan-out module. The module provides the fanout for 9 high frequency reference, 9 local oscillator and 9 calibration signals in the range from 400MHz to 6GHz. In addition, the module provides 22 configurable low jitter differential clock signals in the range up to 160MHz...
Mr
Michael Fenner
(DESY)
12/12/2013, 14:45
Interoperability - further developments
The talk will present the MMC V1.0 software framework for management of MCTA.4 cards. This framework is a "drop-in" module that can be used to implement management of MTCA.4 cards in a very short time.
To allow fast development, DESY also created a hardware reference Platform "MMC V1.0 Starter Kit" that will be presented in the talk. The kit contains an example design for an AMC and a RTM...
Dr
Tomasz Owczarek
(ISE PW)
12/12/2013, 15:00
Interoperability - further developments
The AMC-EMI test board is an AMC board aimed to investige and
qualifiy the EMI perturbances (conductive coupling mode) in MTCA system. The board allows for: measurement of power supply voltages at AMC connector (3.3V_MP, 12V_PP), measurement of low voltage drops caused by currents flowing through ground planes of PCBs or through the crate, introduction of distortion to the AMC-EMI board or...
Dr
Heinz-Hartmut Ibowski
(brightONE ES GmbH)
12/12/2013, 15:15
Interoperability - further developments
The MTCA.4 architecture is specially designed to fulfil the demands of scientific instrumentation with of-the-shelf modules. The use of MTCA.4 in accelerator control is exemplary for applications where there is a mix of highly sensitive analog signals and fast switching digital data. Minimizing the noisefloor results in restrictions for the EMI design of the board. The direct coupling of...
Dr
Frank Ludwig
(DESY)
12/12/2013, 15:30
Interoperability - further developments
To enhance the compatibility and modularity of AMC and RTM boards,
more and more board manufacturers follow the ratified ZOME3 classes
for analog or digital applications. Here, we present the zone description, electrical specifcation, protection sequence and give design examples for application engineers. Future classses will be discussed.
