8-11 December 2014
DESY
Europe/Berlin timezone
Home > Timetable > Session details
PDF | iCal

Standard

Place

Location: DESY
Address: Building 28k, Notkestraße 85 22607 Hamburg
Room: FLASH II Hall
Date: 10 Dec 11:00 - 2:00 PM

Conveners

    • Mr. Hoffmann, Tobias (Helmholtzzentrum für Schwerionenforschung GSI GmbH)
    • Mr. Balzer, Matthias (KIT)

Timetable | Contribution List

Displaying 6 contributions out of 6
Session: Standard
Track: Standard
EMI problems in MTCA.4 system can degrade the whole system accuracy. An AMC board called DAMC-EMI board was developed at DESY to easily identify the conductive mode EMI problems in MTCA.4 system. Now a new revision (R1.1) of the board has been developed. A selected measurement results which show some of the EMI problems in MTCA.4 systems are presented.
Presented by Dr. Tomasz OWCZAREK on 10/12/2014 at 12:45
Session: Standard
Track: Standard
In MTCA.4 systems sensitive analogue and aggressive digital signals have to be handled on one board or one AMC/RTM combination. The open MTCA architecture with plugged in modules designed by multiple designers for multiple purposes creates additional noise on the sensitive analogue signals. In the DC and low frequency range this EMC problem is dominated by conductive coupling especially within the ... More
Presented by Dr. Heinz-Hartmut IBOWSKI on 10/12/2014 at 12:30
Session: Standard
Track: Standard
Learn the key parts to get RTM backplane running in a MTCA.4 systems: * rear transition module for MCH with connection to RTM backplane * rear power module connected to RTM backplane * management of the rear power modules * management of µRTMs connected to front AMCs * management of µRTMs connected to front AMCs and RTM backplane * management of eRTMs with only connection to RTM backplan ... More
Presented by Mr. Vollrath DIRKSEN on 10/12/2014 at 10:45
Session: Standard
Track: Standard
The PICMG xTCA for Physics Technical Committees were approved in May 2009 so now have been operating for over five years. The major work of the PICMG MTCA.4 hardware extensions to MTCA.0, “MicroTCA Enhancements for Rear I/O and Precision Timing”, was approved in September 2011, a short time for such an extensive undertaking. This standard seems now firmly established in several labs and suppo ... More
Presented by Raymond LARSEN on 10/12/2014 at 10:00
Session: Standard
Track: Standard
To enhance the compatibility and modularity of AMC and RTM boards, board manufacturers should follow the ZONE3 classes for analog or digital applications. The ZONE3 classes are in the ratification process of the PICMG consortium. For having a simple E-keying based on class identifiers and to guarantee the backward compatibility of existing boards, subclasses in the analog class were introduce ... More
Presented by Dr. Frank LUDWIG on 10/12/2014 at 10:30
Session: Standard
Track: Standard
To interface with the outside world, many devices provide some control registers which can be accessed via a field bus. Introducing a standardised set of registers will allow one to use the same software tools for many board. They can for instance have a common driver or user space library. The PICMG software working group is currently working on an implementation recommendation guideline called S ... More
Presented by Mr. Till STRAUMANN on 10/12/2014 at 10:15
Building timetable...