Address: Building 28k, Notkestraße 85 22607 Hamburg
Room: FLASH II Hall
Date: from 10 Dec 14:00 to 11 Dec 15:45
10 Dec 14:00 - 3:30 PM
- Mr. Balzer, Matthias (KIT)
11 Dec 11:00 - 12:00 PM
- Mr. Joos, Markus (CERN)
11 Dec 14:30 - 3:45 PM
- Mr. Mann, Dietmar (Schroff GmbH)
Timetable | Contribution List
Displaying 15 contributions out of 15
The WIENER 1000W Low Noise MTCA.4 Power Supply will be presented including the latest improvements.
Presented by Mr. Thomas BERNER on 11/12/2014 at 10:15
Data acquisition and processing systems used in modern physics produce large amount of data. A good example is the image acquisition system, that collects data from megapixel digital cameras. The image acquisition system, composed of ten 1 megapixel cameras, can easily produce the 100 gigabit data stream. The data acquisition and processing system requires a powerful interface to transfer such an ... More
Presented by Dr. Dariusz MAKOWSKI on 10/12/2014 at 13:15
A demonstration of a mTCA.4 crate used as a high precision data acquisition and control system with optical PCIe Gen.3 up-link.
The talk will contain an architecture of a MTCA.4 crate, including an advance backplane for the usage of an extreme precise timing and clock distribution. The crate, including the MCH with the optical PCI-e Gen.3 uplink, the fiber optic cable and the receiving PC board as a unit will be part of a live demonstration.
Presented by Mr. Aksel SALTUKLAR on 10/12/2014 at 13:30
Architecture and main features of the Virtex-7 MTCA.4 carrier IC-FEP-TCAa and its 1.6 GSPS 4 channel FMC
This presentation will explain the architecture and the main features of the Virtex-7 MTCA.4 carrier (IC-FEP-TCAa)and the four channel 1.6 GSPS ADC FMC (IC-ADC-FMCc) developed in cooperation with DESY.
Presented by Mr. Thierry WASTIAUX on 10/12/2014 at 14:15
12 slot MTCA.4 chassis offer 2, 4 or more power module sides. Each application demands a different power configuration. This presentation describes load sharing, 1+1 and n+1 redundancy and a combination of load sharing and redundancy power configuration. The new and available graphical tool Power Configuration Manager (PCM) is introduced. Just by some mouse clicks the needed power configurat ... More
Presented by Mr. Vollrath DIRKSEN on 10/12/2014 at 14:00
A MicroTCA.4 (MTCA.4) compliant Piezo Driver (DRTM-PZT4) has been developed to drive piezoelectric-based actuators used in accelerator instrumentation applications. More specifically, it is used for synchronization of pulsed lasers, stabilization of fiber links, piezo based motor driver control and superconducting cavities fine tuning. This paper briefly presents the designed system requirements a ... More
Presented by Dr. Konrad PRZYGODA on 11/12/2014 at 10:45
Enhancements of the SIS8300 10 channel 125 MSPS 16-bit AMC digitzer resulting in the SIS8300-L2 design will be presented. The status of the 250 MSPS 16-bit SIS8325 MTCA.4 digitizer will be addressed. Both the SIS8300 family and the SIS8325 can be used with Downconverter and direct sampling RTMs to cover a range of frequencies and applications. Possible future developments comprise a 1.6/3. ... More
Presented by Dr. Matthias KIRSCH on 11/12/2014 at 14:15
Up to 16 PCIexpress lanes inside and outside of a MTCA.4 system are demanded in application with high data throughput, low latency and huge computing requirements. This presentation presents how to upgrade existing MTCA.4 systems inside the system with * 16 PCIexpress lanes to the local root complex as rear module behind the MCH at the front-side with * 16 lanes of optical PCIexpr ... More
Presented by Mr. Vollrath DIRKSEN on 11/12/2014 at 10:00
The range of COTS products available in MicroTCA and MTCA.4 has grown rapidly over the last few years. This presentation shows how this provides users with flexibility in system configurations, from very dense processing platforms to distributed control and monitoring systems.
Presented by Mr. Ian SHEARER on 10/12/2014 at 13:45
An overview of CAEN ELS products related to the MTCA.4 standard will be introduced. The HV-PANDA multi-channel High-Voltage power supply module, the FMC-Pico-1M4 quad-channel low-current measurement front-end that can be used in conjunction with the DAMC-FMC25 board for quadrature BPM applications and the dual/quad channel SPF+ FMC modules will be presented as self-developed or distributed and sup ... More
Presented by Enrico BRAIDOTTI on 11/12/2014 at 13:45
This talk presents the TAMC532, an MTCA.4 compliant AMC and its companion µRTM TAMC532-TM for high channel count analog to digital conversion applications, developed within HVF. The TAMC532 provides 32 ADCs with 12 or 14 Bit resolution. Depending on the resolution, sample rates up to 75 Msps are possible. A powerful clock distribution allows using the TAMC532 in nearly any clocking scheme requi ... More
Presented by Mr. Niels KOLL on 11/12/2014 at 14:00
RF-Backplane is an RTM backplane for MTCA.4 based LLRF system. Prototype implementation was designed for upcoming European XFEL accelerator to distribute CLK and analog RF signals (up to 6GHz) between uRTM/eRTM modules. Precision regulation of the RF fields performed by LLRF system forces high signal integrity demands on these RF and CLK distribution networks. Therefore one of the multiple aspects ... More
Presented by Mr. Tomasz LEŚNIAK on 10/12/2014 at 13:00
Session: New Products
An Introduction to Ansys simulation software for Signal Integrity is presented. A PCI Express 8 GT/s Channel example is shown. Analysis and post processing in frequency domain is shown in the SIwave tool. Also, time domain specification in the tool HFSS SI is mentioned.
Presented by Mr. Atte Formum FOCHO on 11/12/2014 at 13:30
Fast evolution of visible and infrared-light digital cameras was observed within last ten years. The cameras providing images with the megapixel resolution are useful diagnostic tools applied in various experiments of modern physics. Dedicated protocols were developed for transferring megapixel images in complex physics experiments. Camera Link and CoaXPress interfaces assure both a high bandwid ... More
Presented by Mr. Remigiusz DANYCH on 11/12/2014 at 10:30
Review of eicSys activities for MTCA.4 Technology Presentation of existing Boards in License from DESY Presentation of existing Boards in own development. Upcoming new developments of MTCA.4 Boards, FMC´s and Systems. First application plans for MTCA.4 in industry projects. Roadmap for developments.
Presented by Mr. Friedrich FIX on 11/12/2014 at 14:30