Login

4th Collaboration Meeting of the European XFEL

23–24 Apr 2015
DESY
Europe/Berlin timezone

Support

Contribution List

45 / 45
0. Welcome and Opening Remarks
Mr Massimo Altarelli (DESY)
23/04/2015, 09:00
1. Status Accelerator
Hans Weise (DESY)
23/04/2015, 09:30
5. AMTF Module testing
Mr Jacek Swierblewski (MKS 1)
23/04/2015, 10:00
2. Installation Status
Markus Hüning (DESY)
23/04/2015, 10:20
4. Infrastructure Schenefeld
Dr Tobias Haas (XFEL)
23/04/2015, 11:10
3. Photon Beam System Status
Dr Andreas Schwarz (European XFEL)
23/04/2015, 11:40
6. First Injector Commissioning
Dr Frank Brinker (DESY)
23/04/2015, 12:10
7. Cavity Production and Testing
Dr Detlef Reschke (DESY), Dr Waldemar Singer (DESY)
23/04/2015, 14:00
Cavity production will come to an end in fall 2015 and testing should be finished after the last retreatment of some cavities. We assume the testing will be finished end of 2015.
16. Installation plan for XTL warm beam lines
Markus Hüning (DESY)
23/04/2015, 14:00
17. BC1/BC2 girder integration
Dr Sven Lederer (DESY)
23/04/2015, 14:30
8. Power Coupler
Dr Walid kaabi (LAL), Wolf-Dietrich Möller (DESY)
23/04/2015, 14:30
Power coupler production runs at a rate of 8 per week from Thales. From 4/2015 on we are going to receive additional 4 couplers per week from CPI. An overview will be given about the production and the testing at LAL (incl. the outlook to the CPI coupler conditioning).
18. Support structures (R28-R40)
Mr Roland Platzer (DESY)
23/04/2015, 14:45
9. Cold Vacuum
Lutz Lilje (DESY -MVS-)
23/04/2015, 15:00
Status of all cold vacuum components incl. number / production rate (matching the needs for an accelerated module assembly). Experience with the L1 installation will be given elsewhere (L1 Installation Session).
10. HOM
Dr Jacek Sekutowicz (DESY)
23/04/2015, 15:15
Status of the component production should be given. Emphasis should be on the availavility of absorbers for the linac installation.
19. Status of downatream L3 (R28-R40) vacuum
Dr Sven Lederer (DESY)
23/04/2015, 15:15
11. Cold Magnets
Dr Fernando Toral (CIEMAT), Dr Heiner Brueck (DESY, MKS)
23/04/2015, 15:30
The successful finishing of the cold magnets should be reported with some concluding remarks.
12. Cold BPMs
Claire Simon (CEA Saclay), Dr Dirk Nölle (DESY, MDI)
23/04/2015, 15:45
Availabiity of cold BPMs for BQU integration
20. Status of vacuum components
Alexander Krasnov (BINP)
23/04/2015, 16:00
23. Availability of electronic racks / infrastructure
Evgeny Negodin (MPY)
23/04/2015, 16:15
32. Onstallation of SASE1/SASE3 undulators
Dr Joachim Pflueger (European XFEL)
23/04/2015, 16:30
13. String & Module Assembly
Mr Axel matheisen (DESY), Mr Kay Jensch (DESY), Dr Olivier Napoly (CEA-Saclay), Mr Stéphane BERRY (CEA-Saclay)
23/04/2015, 16:30
Challenges in string & module assembly should be presented and discussed; inclduing BQU assembly.
33. Installation SASE1/SASE3 x-ray beamlines
Mr Martin Dommach (European XFEL)
23/04/2015, 17:00
14. Non-conformities
Dr Elmar Vogel (DESY), Mr Jacek Swierblewski (MKS 1), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY)
23/04/2015, 17:15
Major non-conformities; solved issues and still ongoing challenges; emphasis on components and modules
34. Installation of SASE1/SASE3 x-ray diagnostics
Dr Jan Gruenert (European XFEL)
23/04/2015, 17:30
21. Status of dump exchange girder
Mr Jan Hauschildt (DESY)
23/04/2015, 17:45
22. Installation SASE1/SASE3 branch
Mr Jan Hauschildt (DESY), Dr Tobias Haas (XFEL)
23/04/2015, 18:00
15. Module Repair Work
Dr Elmar Vogel (DESY), Hans Weise (DESY), Mr Kay Jensch (DESY), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY), Mr axel matheisen (DESY)
23/04/2015, 18:00
discussion of some first ideas wrt. possible module repair work should be collected; which infrastructure could be used when by whom to repair modules?
35. Installation sequence SASE1
Dr Tobias Haas (XFEL)
24/04/2015, 09:00
24. SC module installation (included in 3rd talk of the session)
Dr Elmar Vogel (DESY), Dr Frank Brinker (DESY), Mr Kay Jensch (DESY)
24/04/2015, 09:00
installation procedures should be presented from the 'delivery' of the two modules to the iso vac pumping; technical commissioing plans also
25. Status of injector vacuum components
Dr Sven Lederer (DESY)
24/04/2015, 09:20
what is missing to complete the beam line?
36. Technical realization SASE1 instruments
Dr Gerd Wellenreuther (XFEL)
24/04/2015, 09:20
26. Cabling and module installation plan
Dr Frank Brinker (DESY)
24/04/2015, 09:40
37. Installation & first experiments FXE
Christian Bressler (European XFEL Facility)
24/04/2015, 09:40
38. Installation & first experiments SPB/SFX
Dr Adrian Mancuso (European XFEL)
24/04/2015, 10:00
27. TDS
Dr Alexandr Zavadtsev (INR RAS)
24/04/2015, 10:00
44. AOB discussion
24/04/2015, 10:20
39. OL installation at SASE1
Dr Maximilian Lederer (European XFEL GmbH)
24/04/2015, 10:50
28. Cryogenics
Mrs Serena Barbanotti (DESY)
24/04/2015, 11:00
Experience with cryogenic installation work. Welding procedures incl. QC. What was learned for the large series.
40. Laser-based Synchronisation System Installation
Mr Cezary Sydlo (DESY)
24/04/2015, 11:10
29. Vacuum
Lutz Lilje (DESY -MVS-)
24/04/2015, 11:20
Experience with the vacuum installation work incl. Module connections, connections to feed/end cap, and iso vacuum
41. Integartion of sample environment parts
Dr Joachim Schulz (XFEL)
24/04/2015, 11:30
30. Power RF
Richard Wagner (Desy / MHFp), Dr Stefan Choroba (DESY), Dr Valery Katalev (DESY)
24/04/2015, 11:40
42. Integrating detectors at first instrument
Dr Markus Kuster (European XFEL GmbH)
24/04/2015, 11:50
31. Rack installation & cabling
Evgeny Negodin (MPY), Dr Markus Hoffmann (MSK)
24/04/2015, 12:00
43. Controls during installation & tech. commissioning
Dr Burkhard Heisen (European XFEL GmbH)
24/04/2015, 12:10
Powered by Indico v3.3.5