Conveners
New products
- Tobias Hoffmann (Helmholtzzentrum für Schwerionenforschung GSI GmbH)
New products
- Markus Joos (CERN)
Balasubramanya Bellur Hiriyannaiah
(Vadatech Ltd)
11/12/2013, 11:30
New products
Industry expects the capabilities and performance density of systems to improve over time. This presentation will look at how new chassis and infrastructure elements maximise the space available for payload, packing more capability into smaller spaces.
Mr
Vollrath Dirksen
(N.A.T. GmbH)
11/12/2013, 11:40
New products
This presentation shows a solution to overcome the bottleneck in the data path of the main CPU (root complex), if all IO boards transfer their data via 4 lane PCIexpress DMA. By default all AMC slots offer 4 lanes of PCIexpress transfers. By extending the data path to the local CPU of the NAT-MCH-PHYS64 no modification in the backplane of the MTCA.4 crates is needed to offer a 16 lane...
Mr
Dietmar Mann
(Schroff GmbH)
11/12/2013, 12:00
New products
Pentair/Schroff is one of the companies actively contributing in the development of the PICMG MTCA.4 Standard. Since the last MTCA.4 workshop at DESY in December 2012, Pentair/Schroff has upgraded its MTCA.4 product portfolio.
The presentation shows the range of Schroff products which comply with MTCA.4:
- 12 Slot MTCA.4 chassis with redundant Cooling Units in a push-pull configuration.
-...
Mr
Aksel Saltuklar
(ELMA)
11/12/2013, 12:10
New products
This talk will show hardware solutions for different demands in field
ELMA as a hard ware provider will show scalable products from 1U to 9U
Different accesories will round up this presentaion
Dr
Kirsch Matthias
(Struck Innovative Systeme GmbH)
11/12/2013, 12:20
New products
Struck is an early adopter of the MTCA.4 Standard. The well known 125 MSPS 16-bit SIS8300 V2 and SIS8300-L Xilinx Virtex 5 and 6 based cards will be complemented by the 250 MSPS 16-bit SIS8325 shortly. In parallel DESY's 10 channel DWC10 downconverter and the 8 channel downconverter one channel vector modulator DWC8VM1 RTMs are license products for LLRF applications.
Mr
Thierry Wastiaux
(Interface Concept)
11/12/2013, 12:30
New products
The best that the technology can provide in MTCA.4 Signal Processing
Mr
Thomas Berner
(WIENER Plein + Baus GmbH)
11/12/2013, 12:40
New products
The high power and low noise MTCA.4 power supply made by WIENER Plein & Baus GmbH in Germany features 1000W of total DC output power and further reduced noise & ripple figures. The latest version of this unit includes improved functions for setup and maintenance.
Mr
Simone Farina
(CAEN ELS d.o.o.)
11/12/2013, 12:50
New products
Presentation of a new multi-channel High-Voltage power supply module in AMC.0 rev2 format for MTCA.4 rev1 or MTCA.0 rev1 systems.
Mr
Joel Bovier
(IOxOS Technologies SA)
11/12/2013, 13:00
New products
IOxOS Technologies SA introduces a new MTCA.4 product line based on its most powerful VME64x platform, the IFC_1210 FMC/XMC Intelligent FPGA Controller, and a comprehensive family of ADC mezzanines in FMC form factor, already deployed on particle accelerator control systems in some of the most reputed institutes of Physics.
The new MTCA.4 product line features VITA 57.1 FMC High Pin Count...
Dr
Dariusz Makowski
(Lodz University of Technology, DMCS)
11/12/2013, 14:30
New products
Digital systems used in high speed telecommunication applications, complex data acquisition or control systems of modern Physics transmit enormous amount of data. Every day people break the limits introducing new hardware, standards and protocols allowing transmission of data with higher throughput.
The MTCA.4 hardware was successfully verified with protocols sending data via a single...
Mr
Simon Muff
(Ansys Germany GmbH)
11/12/2013, 14:40
New products
A new 3D Layout interface and meshing technology for the industry standard high frequency structure simulator is shown on example of a PCIe interface, enabling fast and parameterized simulation of physical layer structures as well as their optimization. Statistical methods for data eye calculation and the usage of IBIS AMI and spice models are shown, as well as coupling to thermal and...
Mr
Niels Koll
(TEWS Technologies)
11/12/2013, 14:50
New products
This talk describes an MTCA.4 compliant AMC and µRTM for high channel count analog to digital conversion applications, developed within HVF.
The AMC provides 32 ADCs with 12 or 14 Bit resolution. Depending on the ADC used, sample rates up to 20 Msps are possible.
A powerful clock distribution allows the use of backplane-distributed or on-board generated clocks as ADC sample clock.
A...
Dr
Krzysztof Czuba
(Warsaw University of Technology)
11/12/2013, 15:00
New products
Recently developed RF Backplane (uRFB) option for MTCA.4 crates allows for significant extension of crate capabilities. The backplane was developed to distribute low noise RF signals and high-precision, low-jitter clock signals to RTM cards. The hot-swap feature for RF signals allows the MTCA.4 crate users to build system with multi-channel analog signal processing without many coaxial RF...
Maciek Grzegrzółka
(ISE/WUT)
11/12/2013, 15:10
New products
This contribution describes the design of an Advanced Mezzanine Card (AMC) in the MTCA.4 standard suited for direct analog-to-digital conversion of high-frequency signals up to 2.7 GHz with a maximum ADC clock frequency of 800 MHz. Signal conversion is performed using the undersampling technique. This card was designed for the needs of the LLRF and other control and measurement systems of the...
Mr
Manoel Barros Marin
(CERN)
11/12/2013, 15:20
New products
The AMC Bridge (AB) is a small form factor multipurpose interface board
targeted to users of Advanced Mezzanine Cards (AMCs) that has been designed
at CERN by PH/ESE group. Its intended use is to enhance the stand-alone
capabilities of the AMCs by exploiting some features only accessible through
the AMC connector thus forming a compact bench-top system ideal for
development and test...
Mr
Robert Schachner
(RST Industrie Automation.GmbH)
11/12/2013, 15:30
New products
MTCA.4 is an interesting technological approach that is well suited to usage in sophisticated control systems for automation, medical technology and testing. However, for this approach to be successful users need access to appropriate software technologies.
Mr
Friedrich Fix
(Eicsys Embedded Integrated Control Systems)
11/12/2013, 15:40
New products
During hardware work on data acquisition systems, eicSys has evaluated several form factors and mezzanine standards. First of the most important requirements defined by customers is a system scalability from several analog channels up to thousands. Second one, very important for some customers, is reliability; therefore, ATCA and uTCA standards has been selected for further development.
The...
