26–30 Jul 2021
Zoom
Europe/Berlin timezone

Beam diagnostics at KAHVE Lab proton source and LEBT line

Not scheduled
20m
Zoom

Zoom

Poster Accelerators for HEP T13 - Accelerator for HEP

Speaker

Ms Sevim Açıksöz (1) Boğaziçi University Department of Physics, İstanbul, Turkey 2) Turkey R&D Intelligent Application DC Department, Huawei Technologies, İstanbul, Turkey)

Description

KAHVE Laboratory, a particle detector, accelerator, and instrumentation research laboratory located at Boğaziçi University Kandilli Campus area at Istanbul, is currently working on the design of a RFQ operating at 800 MHz that will accelerate proton beam up to 2 MeV. As a first part of this linear accelerator, a Microwave Discharge Ion Source operating at 2.45 GHz frequency including 20 keV electrode extraction system has been designed, produced, and tested to generate hydrogen plasma and extract proton beams from this plasma medium. To transmit beams to the RFQ cavity, Low Energy Beam Transport (LEBT) line, a beam pipe including 2 solenoid magnets, 2 steerer magnets and a beam diagnostic box between these electromagnets, has been designed and produced, tested separately for now. The beam diagnostic box, including a Faraday cup, a pepper pot plate and there will be a home-built scintillator screen, is designed to measure the current, emittance and profile of the incoming beam. Currently, there has been an upgrade on the ion source. Instead using solenoid electromagnets in order to extract ions from the thermal hydrogen plasma, a new Microwave Discharge Ion Source system has been designed and constructed with permanent magnets. After this permanent magnet configuration upgrade, since the system is operated on the high voltage platform, a higher system stability would be achieved. Permanent magnet profile tests were completed to check the simulation results, then the production of new ion source system was completed, currently it is in the test phase before integrating to the system. In the session, it will be discussed that the simulation & experimental measurement results, and any other details of the whole system, which is constructed at KAHVELab all with local resources. These projects are supported by Istanbul University Scientific Research Commission Project ID 33250 and TUBITAK Project no: 119M774

First author Sevim Açksöz
Email sevimaciksoz@gmail.com
Collaboration / Activity KAHVELab

Primary authors

Ms Sevim Açıksöz (1) Boğaziçi University Department of Physics, İstanbul, Turkey 2) Turkey R&D Intelligent Application DC Department, Huawei Technologies, İstanbul, Turkey) Dr Aytül Adıgüzel (1) Istanbul University Department of Physics, Istanbul, Turkey 2) Feza Gürsey Center for Physics & Mathematics, Boğaziçi University, Üsküdar, İstanbul) Dr Hakan Çetinkaya (Dumlupınar University Department of Physics, Kütahya, Turkey) Mrs Şeyma Esen (Istanbul University Department of Physics, Istanbul, Turkey) Ms Duygu Halis (Yıldız Technical University Department of Physics, Istanbul, Turkey) Ms Alis Hamparsunoğlu (Istanbul University Department of Physics, Istanbul, Turkey) Mr Taha Batuhan İlhan (Istanbul University-Cerrahpasa, Department of Mechanical Engineering, Avcilar, Istanbul) Mr Atacan Kılıçgedik (Marmara University Department of Physics, Istanbul, Turkey) Mr Oğuz Koçer (Istanbul University Department of Physics, Istanbul, Turkey) Dr Salim Oğur (Boğaziçi University Department of Physics, İstanbul, Turkey) Mr Sinan Öz (Boğaziçi University Department of Mechanical Engineering, İstanbul, Turkey) Mr Aydın Özbey (Istanbul University-Cerrahpasa, Department of Mechanical Engineering, Avcilar, Istanbul) Prof. Veysi Erkcan Özcan (1) Boğaziçi University Department of Physics, İstanbul, Turkey 2) Feza Gürsey Center for Physics & Mathematics, Boğaziçi University, Üsküdar, İstanbul) Prof. Nafiz Gökhan Ünel (1) CERN, Department of Physics, Geneva, Switzerland 2) University of California at Irvine Department of Physics, California ,USA.)

Presentation materials