Conveners
Session 4
- Thomas Holzapfel (industrie partner)
Mr
Vollrath Dirksen
(N.A.T. GmbH)
09/12/2015, 16:15
The NAT-JSM is an MTCA compliant JTAG switch module. It’s flexible design makes it compatible with most of todays MTCA chassis providing a JSM slot.
Miss-Insertion protection
The module detects whether it is inserted into an AMC, MCH or JSM slot. Only if a JSM slot is detected the output drivers are turned on. The only prerequisite for miss-insertion protection is that the pinout of the...
Mr
Vollrath Dirksen
(N.A.T. GmbH)
09/12/2015, 16:30
Extension of management of MTCA.4 to address new enhancements
Jan Marjanovic
(CAEN ELS)
09/12/2015, 16:45
The AMC-PICO-8 and HV-PANDA boards will be presented as well as their complementary role as a high voltage bias source and low-current measurement system will be discussed. Various different applications which can benefit from the combined system will be demonstrated. The AMC-PICO-8 is a modular system, composed by a DAMC-FMC25 board and two FMC-PICO-1M4 plug-ins; customization of analog...
Mr
Heiko Körte
(N.A.T. GmbH)
09/12/2015, 17:00
How can MTCA.4 systems benefit from the new features of PCI-ExpressFabric technology announced by Avago?
The Avago PEX9700 series switch chips with ExpressFabric technology offer an industry-suite of new features that dramatically improve performance while reducing power consumption and cost by 50% for the most demanding hyper-converged, NVMe, and rack scale systems.
Key Features:
*...
Dr
Dariusz Makowski
(Lodz University of Technology, DMCS)
09/12/2015, 17:30
Development of high-performance digital cameras in recent years has made them promising tools for observing transient
and fast events in large-scale scientific experiments. The modern digital cameras allows grabbing images with a megapixel resolution and thousands frames per second. A digital camera working with a high resolution and a high frame rate produces a large stream of data reaching...
Christoph Stechmann
(DESY)
09/12/2015, 17:45
This presenstation will demonstrate the advantages of using MicroTCA for the timing system at the European XFEL. Benefits for end-user applications will be presented and a few examples on how trigger and clock signals of AMC modules are connected and configured in the current setup will be shown. A special attention will be given to the versatility of the NAMC-psTimer provided by NAT.
