Choose timezone
Your profile timezone:
Powered by Indico
v3.3.5
Topic: LUXE simulation and analysis TF
Meeting ID: 916 7025 7822
Password: 434044
Time: This is a recurring meeting Meet anytime
Join from PC, Mac, Linux, iOS or Android: https://weizmann.zoom.us/j/91670257822?pwd=L01uZHJMTmtmNkdpUklOTnlMU1M5QT09
Or Telephone:
Dial(for higher quality, dial a number based on your current location):
US: +1 206 337 9723 or +1 470 250 9358
United Kingdom: +44 131 460 1196 or +44 203 481 5237
Israel: +972 3 978 6688
Meeting ID: 916 7025 7822
Password: 434044
International numbers available: https://weizmann.zoom.us/u/aQxpHqFgj
Or an H.323/SIP room system:
H.323:
162.255.37.11 (US West)
162.255.36.11 (US East)
115.114.131.7 (India Mumbai)
115.114.115.7 (India Hyderabad)
213.19.144.110 (Amsterdam Netherlands)
213.244.140.110 (Germany)
103.122.166.55 (Australia)
149.137.40.110 (Singapore)
64.211.144.160 (Brazil)
69.174.57.160 (Canada)
207.226.132.110 (Japan)
Meeting ID: 916 7025 7822
Password: 434044
SIP: 91670257822@zoomcrc.com
Password: 434044
Or Skype for Business (Lync):
https://weizmann.zoom.us/skype/91670257822
Intro:
Gianluca:
- prefers last option
- need 2 collimators to block wide-angle particles (collimator is surrounding the pipe)
- need to look at the radius of the (now it is 2.4 cm)
- check the bkg coming from the pipe (wide angle)
Marco & Sergej:
- profiler should not stay in vacuum (movable, etc) —> prefers option 2
- vacuum chambers needs to be pumped as well independently due to the different volumes
- Sergej will send a sketch
Louis:
- we have a pump planned for the vacuum chambers
- magnet will be changed
- should use the same design
- consider Cherenkov behind the screen?
- target: a wire was also discussed —> should we consider still?
- Maryna:
- foil will survive the radiation,
- with the wire we wanted to reduce the number of pairs in the lyso but the lanex can take the rate
- Gianluca: technically it is easier to use a foil
Matthew:
- try a fully triangular chamber (at least this is possible on one side of the C-shaped magnet)
Marco:
- how close do you want to be to the: 10-20cm distance to the Kapton
- need to design of the mechanical support
- Marco will soon send Sasha a conceptual design so we can put something preliminary but reasonable in the model
- CAD later
Kyle & Gianluca:
- discussed the bkg for the profiler - no surprises.
- complementary measurement of the beam profile with no cost (using the y-coordinate)
Matt & Felipe:
- maybe not need to have 2 IP chambers
- Sasha: the idea behind the current design is to provide clean env for the IP. The new design will have a lot of bkg in the IP (~1e10 for the gamma beam vs 1e6 for the bkg).
- S/R improves by a factor of ~10 just due to the shorter distance between the converter and the IP
- Louis: there is not much place for the IP box in the proposed upstream location as the box is designed now.
- Should take this to Beate and the larger LUXE forum.
- Stewart can check how much clearance do we have in the tunnel
Arka:
- John sees the same more or less (will upload slides to the bkg-studies slot later)
- Sasha will increase the stats so we have something reasonable for analysis before we have a new model