1st TCT Workshop

Europe/Berlin
DESY Hamburg

DESY Hamburg

Description
The first TCT workshop covering TCT and edge-TCT will be held at DESY from Oct 5th until Oct 6th.

The idea is to have talks and hands-on sessions based on the particulars TCT-systems (http://www.particulars.si/). Several groups are setting up such a system and start working with it. In the 1,5 day workshop, we would like to collect knowledge and experience, aiming for successful and efficient application of the systems. It will consist of few talks and technical sessions in the lab. Therefore the amount of participants is limited. More details on the topics can be found on the agenda.

The fee of 35 Euro will cover a common dinner. Fee is to be paid in cash upon registation.

The organisers are Hendrik Jansen, Susanne Kuehn and Sven Wonsak with support from Gregor Kramberger.

Travel Information:
- The workshop will take place at DESY, Hamburg.
- Travel instructions can be found here:
          http://www.desy.de/about_desy/getting_there/hamburg/index_eng.html
- Accommodation can be booked at the DESY hostel. The registration form can be found on
          http://guest-services.desy.de/e17/req1/index_eng.html
   Please indicate the keyword "TCT Workshop" when booking. If an assigned group is needed, please specify "CMS".

The rooms are in building 01a (SR1) and building 01b (SR3, Lab2, Lab4). A pdf map of Desy and a detailed plan of the buildins can be found in the attached material.

Vidyo is also available via the Vidyo room: EUDAQ_2.0_AIDAQ_
For questions concerning the PCB or the common TCT analysis framwwork please contact: hendrik.jansen@desy.de
Minutes
more information
Participants
  • Alexander Lawerenz
  • Christian Gallrapp
  • Christian Scharf
  • Daniel Muenstermann
  • Fabian Schnell
  • Francesca Cenna
  • Giulio Pellegrini
  • Gregor Kramberger
  • Hendrik Jansen
  • Ivan Vila
  • Jens Dopke
  • Jens Weingarten
  • Juan Trenado
  • Leyre Flores
  • Lluis Simon Argemi
  • Marco Ferrero
  • Marcos Fernandez Garcia
  • Maria del Mar Carulla Areste
  • Marko Zavrtanik
  • Nicolo Cartiglia
  • Sofía Otero Ugobono
  • Susanne Kuehn
  • Sven Wonsak
  • Monday, 5 October
    • 13:00 13:30
      Registration SR3 (01b)

      SR3

      01b

    • 13:30 13:35
      Welcome SR3 (01b)

      SR3

      01b

      • 13:30
        Welcome 5m
        Speaker: Dr Hendrik Jansen (DESY)
        Slides
    • 13:35 15:40
      Introduction to setup and preparation of measurements SR3 (01b)

      SR3

      01b

      • 13:35
        Introduction to TCT and edge-TCT workshop 15m
        Speakers: Susanne Kuehn (Univ. Freiburg), Susanne Kuehn (University of Freiburg)
        Slides
      • 13:50
        Hardware description: Particulars system 20m
        Setup components, general hardware description, laser monitoring
        Speakers: Gregor Kramberger (Jozef Stefan Institute), Marko Zavrtanik (Jozef Stefan Institute)
        Slides
      • 14:10
        Harware description: CERN system 20m
        Speaker: Christian Gallrapp (CERN)
        Slides
      • 14:30
        PCBs and mounts for different sensors: diode, strip sensors, CMOS 10m
        Speaker: Dr Hendrik Jansen (DESY)
        Slides
      • 14:40
        Discussion on setups 15m
      • 14:55
        Sensor preparation for edge, backside illumination 10m
        Speaker: Sven Wonsak (University of Liverpool)
        Slides
      • 15:05
        DAQ + Software operation for particulars 15m
        Speaker: Gregor Kramberger (Jozef Stefan Institute)
      • 15:20
        Introduction to finding of focus 10m
        Speakers: Gregor kramberger (Jozef Stefan Institute), Dr Hendrik Jansen (DESY)
    • 15:40 16:00
      Coffee Break 20m
    • 16:00 18:00
      Lab session: DAQ&focus for preparation of scans and sensor preparation Lab2/Lab4 (01b)

      Lab2/Lab4

      01b

      Split in two groups

      • 16:00
        Cabling, DAQ and software operation of particulars system 1h
      • 17:00
        Sensor preparation 1h
    • 19:30 21:30
      Dinner at Mamma Mia 2h
      Barnerstraße 42, 22765 Hamburg
  • Tuesday, 6 October
    • 09:00 10:45
      Theoretical background of measurements and analysis software SR1 (01a)

      SR1

      01a

      • 09:00
        Theoretical background for measurements 20m
        Speakers: Gregor Kramberger (Jozef Stefan Institute), Marko Zavrtanik (Jozef Stefan Institute)
        Slides
      • 09:20
        Discussion and Questions 10m
      • 09:30
        Simulation from Torino 20m
        Speaker: Nicolo Cartiglia (University of Turin and INFN)
        Slides
      • 09:50
        Simulation from Ljubljana 20m
        Speakers: Gregor Kramberger (Jozef Stefan Institute), Marko Zavrtanik (Jozef Stefan Institute)
        Slides
      • 10:10
        Simulation with TRACS 15m
        Speaker: Marcos Fernandes Garcia
        Slides
      • 10:25
        Common code 20m
        Speaker: Dr Hendrik Jansen (DESY)
        Slides
    • 10:45 11:00
      Tea Break 15m
    • 11:00 12:30
      Lab session: Readout boards and temperature control Lab2 (01b)

      Lab2

      01b

      • 11:00
        Measurement of edge pulse 30m
      • 11:30
        Readout board: DRS, Oscilloscope 30m
        Slides
      • 12:00
        Temperature control and stability: PID controller 30m
    • 12:30 14:00
      Lunch Break 1h 30m
    • 14:00 16:00
      Discussion SR1 (01a)

      SR1

      01a

      Please send us details on your experience, any questions, topics you want to be discussed....

      • 14:00
        Do's and Don'ts 20m
        Speaker: Mr Sven Wonsak (University of Liverpool)
        Slides
      • 14:20
        Discussion & Questions 20m
        Discussion on common code, what's missing, etc.
      • 14:40
        Discussion on common code development 20m
        Speaker: Dr Hendrik Jansen (DESY)