4th Collaboration Meeting of the European XFEL

Name: 4th Collaboration Meeting of the European XFEL
Start: 2015-04-23T09:00:00+02:00
End: 2015-04-24T16:00:00+02:00
Location: DESY

23 Apr 2015, 09:00 → 24 Apr 2015, 16:00 Europe/Berlin

DESY

Notkestrasse 85 22603 Hamburg Germany

Hans Weise (DESY), Thomas Tschentscher (European XFEL), Tobias Haas (XFEL), Winfried Decking (DESY)

Description

This meeting gathers the international collaboration that is presently constructing the European XFEL. The meeting covers the accelerator construction with its related infrastructure, the photon beam lines as well as the experiments.

Support

winfried.decking@desy.de

Participants

137 View full list

Thursday 23 April
- Thu 23 Apr
- Fri 24 Apr
- 09:00 → 10:40
  Plenary - Project Overview SR 4 a/b
  
  SR 4 a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 09:00
    
    Welcome and Opening Remarks 30m
    
    Speaker: Mr Massimo Altarelli (DESY)
    
    Slides
  - 09:30
    
    Status Accelerator 30m
    
    Speaker: Hans Weise (DESY)
    
    Slides
  - 10:00
    
    AMTF Module testing 20m
    
    Speaker: Mr Jacek Swierblewski (MKS 1)
    
    Slides
  - 10:20
    
    Installation Status 20m
    
    Speaker: Markus Hüning (DESY)
    
    Slides
- 10:40 → 11:10
  
  Coffee Break 30m
- 11:10 → 13:00
  Plenary - Project Overview SR 4 a/b
  
  SR 4 a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 11:10
    
    Infrastructure Schenefeld 30m
    
    Speaker: Dr Tobias Haas (XFEL)
    
    Slides
  - 11:40
    
    Photon Beam System Status 30m
    
    Speaker: Dr Andreas Schwarz (European XFEL)
    
    Slides
  - 12:10
    
    First Injector Commissioning 30m
    
    Speaker: Dr Frank Brinker (DESY)
    
    Slides
- 14:00 → 16:00
  Cold Linac: Components SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 14:00
    
    Cavity Production and Testing 30m
    
    Cavity production will come to an end in fall 2015 and testing should be finished after the last retreatment of some cavities. We assume the testing will be finished end of 2015.
    
    Speakers: Dr Detlef Reschke (DESY), Dr Waldemar Singer (DESY)
    
    Slides
  - 14:30
    
    Power Coupler 30m
    
    Power coupler production runs at a rate of 8 per week from Thales. From 4/2015 on we are going to receive additional 4 couplers per week from CPI. An overview will be given about the production and the testing at LAL (incl. the outlook to the CPI coupler conditioning).
    
    Speakers: Dr Walid kaabi (LAL), Wolf-Dietrich Möller (DESY)
    
    Slides
  - 15:00
    
    Cold Vacuum 15m
    
    Status of all cold vacuum components incl. number / production rate (matching the needs for an accelerated module assembly). Experience with the L1 installation will be given elsewhere (L1 Installation Session).
    
    Speaker: Lutz Lilje (DESY -MVS-)
    
    Slides
  - 15:15
    
    HOM 15m
    
    Status of the component production should be given. Emphasis should be on the availavility of absorbers for the linac installation.
    
    Speaker: Dr Jacek Sekutowicz (DESY)
    
    Slides
  - 15:30
    
    Cold Magnets 15m
    
    The successful finishing of the cold magnets should be reported with some concluding remarks.
    
    Speakers: Dr Fernando Toral (CIEMAT), Dr Heiner Brueck (DESY, MKS)
    
    Slides
  - 15:45
    
    Cold BPMs 15m
    
    Availabiity of cold BPMs for BQU integration
    
    Speakers: Claire Simon (CEA Saclay), Dr Dirk Nölle (DESY, MDI)
    
    Slides
- 14:00 → 15:30
  Warm Beamlines Installation - XTL CFEL SR1
  
  CFEL SR1
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Discuss availability of components and review installation steps and schedule for warm beamlines.
  - 14:00
    
    Installation plan for XTL warm beam lines 30m
    
    Speaker: Markus Hüning (DESY)
    
    Slides
  - 14:30
    
    BC1/BC2 girder integration 15m
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
  - 14:45
    
    Support structures (R28-R40) 30m
    
    Speaker: Mr Roland Platzer (DESY)
    
    Slides
  - 15:15
    
    Status of downatream L3 (R28-R40) vacuum 15m
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
- 15:30 → 16:00
  
  Coffee Break 30m
- 16:00 → 16:30
  
  Coffee Break 30m
- 16:00 → 18:45
  XTD Tunnel Installation CFEL SR1 (DESY Hamburg)
  
  CFEL SR1
  
  DESY Hamburg
  
  Discuss and review avaialbility of components and installation sequence for XTD tunnels.
  - 16:00
    
    Status of vacuum components 15m
    
    Speaker: Alexander Krasnov (BINP)
    
    Slides
  - 16:15
    
    Availability of electronic racks / infrastructure 15m
    
    Speaker: Evgeny Negodin (MPY)
    
    Slides
  - 16:30
    
    Onstallation of SASE1/SASE3 undulators 30m
    
    Speaker: Dr Joachim Pflueger (European XFEL)
    
    Slides
  - 17:00
    
    Installation SASE1/SASE3 x-ray beamlines 30m
    
    Speaker: Mr Martin Dommach (European XFEL)
    
    Slides
  - 17:30
    
    Installation of SASE1/SASE3 x-ray diagnostics 15m
    
    Speaker: Dr Jan Gruenert (European XFEL)
    
    Slides
  - 17:45
    
    Status of dump exchange girder 15m
    
    Speaker: Mr Jan Hauschildt (DESY)
    
    Slides
  - 18:00
    
    Installation SASE1/SASE3 branch 30m
    
    Speakers: Mr Jan Hauschildt (DESY), Dr Tobias Haas (XFEL)
    
    Slides
- 16:30 → 18:45
  Cold Linac: Assembly SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 16:30
    String & Module Assembly 45m
    
    Challenges in string & module assembly should be presented and discussed; inclduing BQU assembly.
    
    Speakers: Mr Axel matheisen (DESY), Mr Kay Jensch (DESY), Dr Olivier Napoly (CEA-Saclay), Mr Stéphane BERRY (CEA-Saclay)
    
    Slides
    
    Cavity_degradation_in_CR_(Berry).pptx
    
    CEA_preventive_action_for_coupler_warm_part.potx
    
    WM03-09.pptx
  - 17:15
    Non-conformities 45m
    
    Major non-conformities; solved issues and still ongoing challenges; emphasis on components and modules
    
    Speakers: Dr Elmar Vogel (DESY), Mr Jacek Swierblewski (MKS 1), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY)
    
    Slides
    
    CEA_preventive_action_for_coupler_warm_part.potx
    
    IPA_analysis_-_FMEA_at_XFEL.pdf
    
    PC-nonconformities-April-2015.pdf
    
    Session_on_Non-Conformities.pdf
    
    WP07_Non_Conformities.pptx
  - 18:00
    Module Repair Work 45m
    
    discussion of some first ideas wrt. possible module repair work should be collected; which infrastructure could be used when by whom to repair modules?
    
    Speakers: Dr Elmar Vogel (DESY), Hans Weise (DESY), Mr Kay Jensch (DESY), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY), Mr axel matheisen (DESY)
    
    Slides
    
    Lecksuche_XM22.pptx
    
    Lecksuche_XM24.pptx
    
    Module_Meeting_@_2015-04-08_@_2015-04-20.pdf
    
    Module_Repair.pptx
- 19:00 → 23:00
  
  Social Event DESY Canteen Extension (DESY Hamburg)
  
  DESY Canteen Extension
  
  DESY Hamburg
Friday 24 April
- Thu 23 Apr
- Fri 24 Apr
- 09:00 → 10:20
  Infrastructure, XHEXP1 and scientific instrumentation installations CFEL SR1
  
  CFEL SR1
  
  DESY
  - 09:00
    
    Installation sequence SASE1 20m
    
    Speaker: Dr Tobias Haas (XFEL)
    
    Slides
  - 09:20
    
    Technical realization SASE1 instruments 20m
    
    Speaker: Dr Gerd Wellenreuther (XFEL)
    
    Slides
  - 09:40
    
    Installation & first experiments FXE 20m
    
    Speaker: Christian Bressler (European XFEL Facility)
    
    Slides
  - 10:00
    
    Installation & first experiments SPB/SFX 20m
    
    Speaker: Dr Adrian Mancuso (European XFEL)
    
    Slides
- 09:00 → 10:30
  Injector Installation SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Discuss all remaining steps until the final closing of the injector tunnel for cool-down.
  - 09:00
    
    SC module installation (included in 3rd talk of the session) 20m
    
    installation procedures should be presented from the 'delivery' of the two modules to the iso vac pumping; technical commissioing plans also
    
    Speakers: Dr Elmar Vogel (DESY), Dr Frank Brinker (DESY), Mr Kay Jensch (DESY)
  - 09:20
    
    Status of injector vacuum components 20m
    
    what is missing to complete the beam line?
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
  - 09:40
    
    Cabling and module installation plan 20m
    
    Speaker: Dr Frank Brinker (DESY)
    
    Slides
  - 10:00
    
    TDS 20m
    
    Speaker: Dr Alexandr Zavadtsev (INR RAS)
    
    Slides
  - 10:20
    
    AOB discussion 10m
- 10:20 → 10:50
  
  Break 30m
- 10:30 → 11:00
  
  Coffee Break 30m
- 10:50 → 12:30
  Infrastructure, XHEXP1 and scientific instrumentation installations CFEL SR1
  
  CFEL SR1
  
  DESY
  - 10:50
    
    OL installation at SASE1 20m
    
    Speaker: Dr Maximilian Lederer (European XFEL GmbH)
    
    Slides
  - 11:10
    
    Laser-based Synchronisation System Installation 20m
    
    Speaker: Mr Cezary Sydlo (DESY)
    
    Slides
  - 11:30
    
    Integartion of sample environment parts 20m
    
    Speaker: Dr Joachim Schulz (XFEL)
    
    Slides
  - 11:50
    
    Integrating detectors at first instrument 20m
    
    Speaker: Dr Markus Kuster (European XFEL GmbH)
    
    Slides
  - 12:10
    
    Controls during installation & tech. commissioning 20m
    
    Speaker: Dr Burkhard Heisen (European XFEL GmbH)
    
    Slides
- 11:00 → 12:30
  L1 Tunnel Installation SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Summarize the experince gained so far and evaluate how well we are prepared for the large series.
  - 11:00
    
    Cryogenics 20m
    
    Experience with cryogenic installation work. Welding procedures incl. QC. What was learned for the large series.
    
    Speaker: Mrs Serena Barbanotti (DESY)
    
    Slides
  - 11:20
    
    Vacuum 20m
    
    Experience with the vacuum installation work incl. Module connections, connections to feed/end cap, and iso vacuum
    
    Speaker: Lutz Lilje (DESY -MVS-)
    
    Slides
  - 11:40
    
    Power RF 20m
    
    Speakers: Richard Wagner (Desy / MHFp), Dr Stefan Choroba (DESY), Dr Valery Katalev (DESY)
    
    Slides
  - 12:00
    
    Rack installation & cabling 20m
    
    Speakers: Evgeny Negodin (MPY), Dr Markus Hoffmann (MSK)
    
    Slides

4th Collaboration Meeting of the European XFEL

DESY

SR 4 a/b

DESY

SR 4 a/b

DESY

SR 4a/b

DESY

CFEL SR1

DESY

CFEL SR1

DESY Hamburg

SR 4a/b

DESY

DESY Canteen Extension

DESY Hamburg

CFEL SR1

DESY

SR 4a/b

DESY

CFEL SR1

DESY

SR 4a/b

DESY