4th Collaboration Meeting of the European XFEL

Name: 4th Collaboration Meeting of the European XFEL
Start: 2015-04-23T09:00:00+02:00
End: 2015-04-24T16:00:00+02:00
Location: DESY

23 Apr 2015, 09:00 → 24 Apr 2015, 16:00 Europe/Berlin

DESY

Notkestrasse 85 22603 Hamburg Germany

Hans Weise (DESY), Thomas Tschentscher (European XFEL), Tobias Haas (XFEL), Winfried Decking (DESY)

Description

This meeting gathers the international collaboration that is presently constructing the European XFEL. The meeting covers the accelerator construction with its related infrastructure, the photon beam lines as well as the experiments.

Support

winfried.decking@desy.de

Participants

137 View full list

Thursday 23 April
- Thu 23 Apr
- Fri 24 Apr
- Plenary - Project Overview SR 4 a/b
  
  SR 4 a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 1
    
    Welcome and Opening Remarks
    
    Speaker: Mr Massimo Altarelli (DESY)
    
    Slides
  - 2
    
    Status Accelerator
    
    Speaker: Hans Weise (DESY)
    
    Slides
  - 3
    
    AMTF Module testing
    
    Speaker: Mr Jacek Swierblewski (MKS 1)
    
    Slides
  - 4
    
    Installation Status
    
    Speaker: Markus Hüning (DESY)
    
    Slides
- 10:40
  
  Coffee Break
- Plenary - Project Overview SR 4 a/b
  
  SR 4 a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 5
    
    Infrastructure Schenefeld
    
    Speaker: Dr Tobias Haas (XFEL)
    
    Slides
  - 6
    
    Photon Beam System Status
    
    Speaker: Dr Andreas Schwarz (European XFEL)
    
    Slides
  - 7
    
    First Injector Commissioning
    
    Speaker: Dr Frank Brinker (DESY)
    
    Slides
- Cold Linac: Components SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 8
    
    Cavity Production and Testing
    
    Cavity production will come to an end in fall 2015 and testing should be finished after the last retreatment of some cavities. We assume the testing will be finished end of 2015.
    
    Speakers: Dr Detlef Reschke (DESY), Dr Waldemar Singer (DESY)
    
    Slides
  - 9
    
    Power Coupler
    
    Power coupler production runs at a rate of 8 per week from Thales. From 4/2015 on we are going to receive additional 4 couplers per week from CPI. An overview will be given about the production and the testing at LAL (incl. the outlook to the CPI coupler conditioning).
    
    Speakers: Dr Walid kaabi (LAL), Wolf-Dietrich Möller (DESY)
    
    Slides
  - 10
    
    Cold Vacuum
    
    Status of all cold vacuum components incl. number / production rate (matching the needs for an accelerated module assembly). Experience with the L1 installation will be given elsewhere (L1 Installation Session).
    
    Speaker: Lutz Lilje (DESY -MVS-)
    
    Slides
  - 11
    
    HOM
    
    Status of the component production should be given. Emphasis should be on the availavility of absorbers for the linac installation.
    
    Speaker: Dr Jacek Sekutowicz (DESY)
    
    Slides
  - 12
    
    Cold Magnets
    
    The successful finishing of the cold magnets should be reported with some concluding remarks.
    
    Speakers: Dr Fernando Toral (CIEMAT), Dr Heiner Brueck (DESY, MKS)
    
    Slides
  - 13
    
    Cold BPMs
    
    Availabiity of cold BPMs for BQU integration
    
    Speakers: Claire Simon (CEA Saclay), Dr Dirk Nölle (DESY, MDI)
    
    Slides
- Warm Beamlines Installation - XTL CFEL SR1
  
  CFEL SR1
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Discuss availability of components and review installation steps and schedule for warm beamlines.
  - 14
    
    Installation plan for XTL warm beam lines
    
    Speaker: Markus Hüning (DESY)
    
    Slides
  - 15
    
    BC1/BC2 girder integration
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
  - 16
    
    Support structures (R28-R40)
    
    Speaker: Mr Roland Platzer (DESY)
    
    Slides
  - 17
    
    Status of downatream L3 (R28-R40) vacuum
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
- 15:30
  
  Coffee Break
- 16:00
  
  Coffee Break
- XTD Tunnel Installation CFEL SR1 (DESY Hamburg)
  
  CFEL SR1
  
  DESY Hamburg
  
  Discuss and review avaialbility of components and installation sequence for XTD tunnels.
  - 18
    
    Status of vacuum components
    
    Speaker: Alexander Krasnov (BINP)
    
    Slides
  - 19
    
    Availability of electronic racks / infrastructure
    
    Speaker: Evgeny Negodin (MPY)
    
    Slides
  - 20
    
    Onstallation of SASE1/SASE3 undulators
    
    Speaker: Dr Joachim Pflueger (European XFEL)
    
    Slides
  - 21
    
    Installation SASE1/SASE3 x-ray beamlines
    
    Speaker: Mr Martin Dommach (European XFEL)
    
    Slides
  - 22
    
    Installation of SASE1/SASE3 x-ray diagnostics
    
    Speaker: Dr Jan Gruenert (European XFEL)
    
    Slides
  - 23
    
    Status of dump exchange girder
    
    Speaker: Mr Jan Hauschildt (DESY)
    
    Slides
  - 24
    
    Installation SASE1/SASE3 branch
    
    Speakers: Mr Jan Hauschildt (DESY), Dr Tobias Haas (XFEL)
    
    Slides
- Cold Linac: Assembly SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  - 25
    String & Module Assembly
    
    Challenges in string & module assembly should be presented and discussed; inclduing BQU assembly.
    
    Speakers: Mr Axel matheisen (DESY), Mr Kay Jensch (DESY), Dr Olivier Napoly (CEA-Saclay), Mr Stéphane BERRY (CEA-Saclay)
    
    Slides
    
    Cavity_degradation_in_CR_(Berry).pptx
    
    CEA_preventive_action_for_coupler_warm_part.potx
    
    WM03-09.pptx
  - 26
    Non-conformities
    
    Major non-conformities; solved issues and still ongoing challenges; emphasis on components and modules
    
    Speakers: Dr Elmar Vogel (DESY), Mr Jacek Swierblewski (MKS 1), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY)
    
    Slides
    
    CEA_preventive_action_for_coupler_warm_part.potx
    
    IPA_analysis_-_FMEA_at_XFEL.pdf
    
    PC-nonconformities-April-2015.pdf
    
    Session_on_Non-Conformities.pdf
    
    WP07_Non_Conformities.pptx
  - 27
    Module Repair Work
    
    discussion of some first ideas wrt. possible module repair work should be collected; which infrastructure could be used when by whom to repair modules?
    
    Speakers: Dr Elmar Vogel (DESY), Hans Weise (DESY), Mr Kay Jensch (DESY), Lutz Lilje (DESY -MVS-), Dr Olivier Napoly (CEA-Saclay), Wolf-Dietrich Möller (DESY), Mr axel matheisen (DESY)
    
    Slides
    
    Lecksuche_XM22.pptx
    
    Lecksuche_XM24.pptx
    
    Module_Meeting_@_2015-04-08_@_2015-04-20.pdf
    
    Module_Repair.pptx
- Social Event DESY Canteen Extension (DESY Hamburg)
  
  DESY Canteen Extension
  
  DESY Hamburg
Friday 24 April
- Thu 23 Apr
- Fri 24 Apr
- Infrastructure, XHEXP1 and scientific instrumentation installations CFEL SR1
  
  CFEL SR1
  
  DESY
  - 28
    
    Installation sequence SASE1
    
    Speaker: Dr Tobias Haas (XFEL)
    
    Slides
  - 29
    
    Technical realization SASE1 instruments
    
    Speaker: Dr Gerd Wellenreuther (XFEL)
    
    Slides
  - 30
    
    Installation & first experiments FXE
    
    Speaker: Christian Bressler (European XFEL Facility)
    
    Slides
  - 31
    
    Installation & first experiments SPB/SFX
    
    Speaker: Dr Adrian Mancuso (European XFEL)
    
    Slides
- Injector Installation SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Discuss all remaining steps until the final closing of the injector tunnel for cool-down.
  - 32
    
    SC module installation (included in 3rd talk of the session)
    
    installation procedures should be presented from the 'delivery' of the two modules to the iso vac pumping; technical commissioing plans also
    
    Speakers: Dr Elmar Vogel (DESY), Dr Frank Brinker (DESY), Mr Kay Jensch (DESY)
  - 33
    
    Status of injector vacuum components
    
    what is missing to complete the beam line?
    
    Speaker: Dr Sven Lederer (DESY)
    
    Slides
  - 34
    
    Cabling and module installation plan
    
    Speaker: Dr Frank Brinker (DESY)
    
    Slides
  - 35
    
    TDS
    
    Speaker: Dr Alexandr Zavadtsev (INR RAS)
    
    Slides
  - 36
    
    AOB discussion
- 10:20
  
  Break
- 10:30
  
  Coffee Break
- Infrastructure, XHEXP1 and scientific instrumentation installations CFEL SR1
  
  CFEL SR1
  
  DESY
  - 37
    
    OL installation at SASE1
    
    Speaker: Dr Maximilian Lederer (European XFEL GmbH)
    
    Slides
  - 38
    
    Laser-based Synchronisation System Installation
    
    Speaker: Mr Cezary Sydlo (DESY)
    
    Slides
  - 39
    
    Integartion of sample environment parts
    
    Speaker: Dr Joachim Schulz (XFEL)
    
    Slides
  - 40
    
    Integrating detectors at first instrument
    
    Speaker: Dr Markus Kuster (European XFEL GmbH)
    
    Slides
  - 41
    
    Controls during installation & tech. commissioning
    
    Speaker: Dr Burkhard Heisen (European XFEL GmbH)
    
    Slides
- L1 Tunnel Installation SR 4a/b
  
  SR 4a/b
  
  DESY
  
  Notkestrasse 85 22603 Hamburg Germany
  
  Summarize the experince gained so far and evaluate how well we are prepared for the large series.
  - 42
    
    Cryogenics
    
    Experience with cryogenic installation work. Welding procedures incl. QC. What was learned for the large series.
    
    Speaker: Mrs Serena Barbanotti (DESY)
    
    Slides
  - 43
    
    Vacuum
    
    Experience with the vacuum installation work incl. Module connections, connections to feed/end cap, and iso vacuum
    
    Speaker: Lutz Lilje (DESY -MVS-)
    
    Slides
  - 44
    
    Power RF
    
    Speakers: Richard Wagner (Desy / MHFp), Dr Stefan Choroba (DESY), Dr Valery Katalev (DESY)
    
    Slides
  - 45
    
    Rack installation & cabling
    
    Speakers: Evgeny Negodin (MPY), Dr Markus Hoffmann (MSK)
    
    Slides

4th Collaboration Meeting of the European XFEL

DESY

SR 4 a/b

DESY

SR 4 a/b

DESY

SR 4a/b

DESY

CFEL SR1

DESY

CFEL SR1

DESY Hamburg

SR 4a/b

DESY

DESY Canteen Extension

DESY Hamburg

CFEL SR1

DESY

SR 4a/b

DESY

CFEL SR1

DESY

SR 4a/b

DESY