Advanced Techniques in LLRF control for XFEL - Collaboration Workshop

Europe/Warsaw
Otwock-Swierk

Otwock-Swierk

Frank Ludwig (DESY), Holger Schlarb (DESY), Mariusz Grecki (DESY)
Description


Advanced Techniques in LLRF control for XFEL is Collaboration Workshop for all people participating in developement of the LLRF system for XFEL and FLASH accelerators. Meeting focused on summary of recenty made progress in all topics, and making plans for future development.

Participants
  • Adam Abramowicz
  • Adam Dworzanski
  • Adam Piotrowski
  • Anna Łysiuk
  • Bartosz Gąsowski
  • Cezary Sydlo
  • Christian Schmidt
  • Christopher Gerth
  • Daniel Kuehn
  • Dariusz Makowski
  • Dominik Sikora
  • Ewa Janas
  • Falco Zummack
  • Frank Ludwig
  • Hans-Thomas Duhme
  • Henning Christof Weddig
  • Holger Kay
  • Holger Schlarb
  • Ignacy Maciej Kudla
  • Igor Rutkowski
  • Jan Piekarski
  • Jaroslaw Szewinski
  • Julien Branlard
  • Konrad Przygoda
  • Krzysztof Czuba
  • Lukasz Zembala
  • Maciek Grzegrzółka
  • Marek Dominik
  • Marie Kristin Czwalinna
  • Mariusz Grecki
  • Mateusz Zukocinski
  • Matthias Felber
  • Matthias Hoffmann
  • Michael Bousonville
  • Michael Heuer
  • Napieralski Andrzej
  • Pawel Barmuta
  • Pawel Gontarek
  • Pawel Predki
  • Przemyslaw Kownacki
  • Robert Meyer
  • Samer Bou Habib
  • Stefan Korolczuk
  • Sven Pfeiffer
  • Szymon Jabłoński
  • Thorsten Lamb
  • Tomasz Jezynski
  • Tomasz Kozak
  • Tomasz Leśniak
  • Tomasz Wasiewicz
  • Uros Mavric
  • Valeri Ayvazyan
  • Wojciech Cichalewski
  • Wojciech Wierba
  • Łukasz Butkowski
    • 07:00 08:00
      Breakfast 1h
    • 08:00 12:00
      Visit in Swierk 4h
    • 12:00 13:00
      Lunch 1h
    • 13:00 15:00
      X-FEL Installation: General
      Convener: Mr Jaroslaw Szewinski (Soltan Institute for Nuclear Studies)
      • 13:00
        Status update on HVF 20m
        Speaker: Dr Holger Schlarb (DESY)
        Slides
      • 13:20
        Module commercialization and licensing 20m
        Speaker: Dr Frank Ludwig (DESY)
        Slides
      • 13:40
        XFEL LLRF (production/installation/commissioning) schedule and milestones 20m
        Speaker: Julien Branlard (DESY)
        Slides
      • 14:00
        XFEL WP18 Hardware requirements and schedule 20m
        Speaker: Dr Christopher Gerth (DESY)
        Slides
      • 14:20
        Optical synchronization 20m
        Speaker: Mr Cezary Sydlo (DESY)
        Slides
      • 14:40
        Discussion 20m
    • 15:00 15:15
      Coffe Break 15m
    • 15:15 17:15
      X-FEL Installation: Injector
      Convener: Mr Wojciech Wierba (Institute of Nuclear Physics PAN, Cracow, Poland)
      • 15:15
        Cabling and rack installation 25m
        Speaker: Mr Wojciech Wierba (Institute of Nuclear Physics PAN, Cracow, Poland)
        Slides
      • 15:40
        RF Synchronization Overview and Installation Plans 15m
        Speaker: Dr Krzysztof Czuba (ISE, Warsaw University of Technology)
        Slides
      • 15:55
        X-FEL MO Status 15m
        Speaker: Mr Lukasz Zembala (ISE, Warsaw University of Technology)
        Slides
      • 16:10
        Interferometer for RF Synchronization - Status and Plans 15m
        Speaker: Mr Dominik Sikora (ISE, Warsaw University of Technology)
        Slides
      • 16:25
        Hardware requirements 15m
        Speaker: Julien Branlard (DESY)
        Slides
      • 16:40
        Discussion 35m
    • 17:15 17:30
      Coffe Break 15m
    • 17:30 18:30
      X-FEL Installation: Main Linacs
      Convener: Dr Holger Schlarb (DESY)
      • 17:30
        X-FEL Installation Overview 15m
        Speaker: Mr Wojciech Wierba (Institute of Nuclear Physics PAN, Cracow, Poland)
        Slides
      • 17:45
        Overview FLUTE, TELBE, ESS 15m
        Speaker: Dr Matthias Hoffmann (DESY)
        Slides
      • 18:00
        Update on X2TIMER 15m
        Speaker: Holger Kay (DESY)
        Slides
      • 18:15
        CW optical synchronization link 15m
        Speaker: Mr Szymon Jablonski Szymon Jablonski (DESY)
        Slides
    • 18:30 18:45
      Coffe Break 15m
    • 18:45 20:00
      X-FEL Installation: Working Group 1: Racks in MO area, RF gun LLRF system installation
      Convener: Mr Wojciech Wierba (Institute of Nuclear Physics PAN, Cracow, Poland)
      • 18:45
        Working group 1 1h
        Racks in MO area (prepared by Czuba and Wierba, input WP28) Installation of RF gun LLRF system (prepared by Branlard)
    • 18:45 20:00
      X-FEL Installation: Working Group 2: HVF Projects and boards for HZDR, KIT, HZB, ESS
      Convener: Dr Matthias Hoffmann (DESY)
      • 18:45
        Working group 2 1h
        HVF Projects and boards for HZDR, KIT, HZB, ESS (prepared M. Hoffmann, H. Schlarb)
    • 20:00 22:00
      Dinner 2h
    • 08:00 09:00
      Breakfast 1h
    • 09:00 10:30
      Mass production of X-FEL components: MTCA infrastructure
      Convener: Dr Tomasz Jezynski (DESY)
      • 09:00
        MTCA crates: Elma/Schroff, RFB compatibility + 2U crates 15m
        Speaker: Dr Tomasz Jezynski (DESY)
        Slides
      • 09:15
        RF Backplane 15m
        Speaker: Mr Tomasz Leśniak (ISE/ Warsaw University of Technology)
        Slides
      • 09:30
        MTCA core components: CPU, MCH, uPS 15m
        Speaker: Dr Tomasz Jezynski (DESY)
        Slides
      • 09:45
        uLOG carrier and RF board 15m
        Speaker: Uros Mavric (DESY)
        Slides
      • 10:00
        Discussion (MTCA Infrastructure) 30m
    • 09:00 10:30
      Optical synchronization: Introduction and board presentation
      Convener: Mr Matthias Felber (DESY)
      • 09:00
        System overview: MTCA for optical links 15m
        Speaker: Mr Matthias Felber (DESY)
        Slides
      • 09:15
        uFMC20 15m
        Speaker: Mr Hans-Thomas Duhme (desy)
      • 09:30
        DRTM-AD84 15m
        Speaker: Mr Robert Meyer (DESY)
        Slides
      • 09:45
        uFMC25 15m
        Speaker: Mr Stefan Korolczuk (The Andrzej Soltan Institute for Nuclear Studies (IPJ))
        Slides
      • 10:00
        uPZT4 15m
        Speaker: Mr Konrad Przygoda (TUL)
        Slides
      • 10:15
        DAMC02 Controller Firmware 15m
        Speaker: Mr Pawel Predki (TUL / DMCS)
        Slides
    • 10:30 10:45
      Coffe Break 15m
    • 10:45 12:00
      Mass production of X-FEL components: MTCA standard modules
      Convener: Dr Frank Ludwig (DESY)
      • 10:45
        uTC Board Status 15m
        Speaker: Dr Dariusz Makowski (Tech. Univ. of Lodz, DMCS)
        Slides
      • 11:00
        uDWC 15m
        Speaker: Mr Dominik Sikora (ISE, Warsaw University of Technology)
        Slides
      • 11:15
        uVM Status 15m
        Speaker: Mr Igor Rutkowski (ISE, Warsaw University of Technology)
        Slides
      • 11:30
        uDWC-VM 15m
        Speaker: Dr Matthias Hoffmann (DESY)
        Slides
      • 11:45
        Low frequency VM status 15m
        Speaker: Maciek Grzegrzółka (ISE/WUT)
        Slides
    • 10:45 12:00
      Optical synchronization: Discussion on interoperability and compatibility of boards
      Convener: Mr Matthias Felber (DESY)
      • 10:45
        Discussion 1h 15m
        Zone3, reduced RF backplane for HVPS communication and management, Topology, Communication bandwidth, Latency, What is needed for tests of one complete unit (for July 2013)
    • 12:00 13:00
      Lunch 1h
    • 13:00 14:45
      Mass production of X-FEL components: MTCA standard modules
      Convener: Dr Frank Ludwig (DESY)
      • 13:00
        uDS800 Status 15m
        Speaker: Mr Samer Bou Habib (ISE, Warsaw University of Technology)
        Slides
      • 13:15
        Special RTMs: for KLM, for HOMs 15m
        Speaker: Mr Samer Bou Habib (ISE, Warsaw University of Technology)
        Slides
      • 13:30
        Special AMCs: for RadMon 15m
        Speaker: Mr Dariusz Makowski Makowski (Tech. Univ. of Lodz, DMCS)
        Slides
      • 13:45
        Discussion (MTCA standard modules) 1h
    • 13:00 14:45
      Optical synchronization: Laser synchronization
      Convener: Dr Holger Schlarb (DESY)
      • 13:00
        Generic concept for front-end electronics "Laser Synchronization" 15m
        Speaker: Dr Holger Schlarb (DESY)
        Slides
      • 13:15
        Experience with Short-pulse laser and at REGAE 15m
        Speaker: Mr Matthias Felber (DESY)
        Slides
      • 13:30
        Server for Laser synchronization based on down-conversion 15m
        Speaker: Mr Tomasz Kozak (DMCS)
        Slides
      • 13:45
        Discussion on concept and board layouts 1h
        Specialized RTM for SIS8300L/SIS8325, Communication bandwidth and latency requirements, VHDL resources
    • 14:45 15:00
      Coffe Break 15m
    • 15:00 16:30
      Mass production of X-FEL components: External modules
      Convener: Dr Krzysztof Czuba (ISE, Warsaw University of Technology)
      • 15:00
        PSM Status 15m
        Speaker: Mr Daniel Kuehn (DESY)
        Slides
      • 15:15
        DCM Status 15m
        Speaker: Mr Jan Piekarski (Warsaw University of Technology - Institute of Electronic Systems)
        Slides
      • 15:30
        PZ16M Status 15m
        Speaker: Dr Mariusz Grecki (DESY)
        Slides
      • 15:45
        LOGM Status 15m
        Speaker: Mr Mateusz Zukocinski (Warsaw University of Technology)
        Slides
    • 15:00 16:30
      Optical synchronization: BAM systems
      Convener: Mrs Marie Kristin Czwalinna (DESY)
      • 15:00
        BAM system overview 10m
        Speaker: Mrs Marie Kristin Czwalinna (DESY)
        Slides
      • 15:10
        uFMC25 for BAM 10m
        Speaker: Mr Jaroslaw Szewinski (Soltan Institute for Nuclear Studies)
        Slides
      • 15:20
        FMC Mezzanine for BAM 10m
        Speaker: Mr Samer Bou Habib (ISE, Warsaw University of Technology)
        Slides
      • 15:30
        DFMC-MD22 10m
        Speaker: Mr Robert Meyer (DESY)
        Slides
      • 15:40
        BAM Discussion 50m
        Requirements for the complete BAM-system: * The lowest level: availability of electronics for control of motors, encoder, analogue I/O, etc. * The hardware level: cabling, signal lines, limitations in latency and bandwidth etc., interfaces to other subsystems (LLRF, BPM, ...) * The software level: firmware for communication between cards in the uTCA crate, server for the BAM read-out and control * Fix all specifications * Prepare schedule for developments and tests
    • 16:30 16:45
      Coffe Break 15m
    • 16:45 18:45
      Mass production of X-FEL components: Testing, Installation
      Convener: Mr Pawel Barmuta (ISE)
      • 16:45
        KDS and equipemnt inventory management 20m
        Speaker: Mr Ignacy Kudla (DESY)
        Slides
      • 17:05
        Testing procedures and setup 15m
        Speaker: Mr Pawel Barmuta
        Slides
      • 17:20
        uTCA Problems Summary 15m
        Speaker: Uros Mavric (DESY)
      • 17:35
        Discussion 1h 10m
    • 16:45 18:45
      Optical synchronization: REFM
      Convener: Mr Thorsten Lamb (DESY)
      • 16:45
        Reference Distribution Concept 15m
        Speaker: Dr Krzysztof Czuba (ISE, Warsaw University of Technology)
        Slides
      • 17:00
        L2RF Optics and Integration 15m
        Speaker: Mr Thorsten Lamb (DESY)
        Slides
      • 17:15
        REFM / RF Reflectometer 15m
        Speaker: Mr Dominik Sikora (ISE, Warsaw University of Technology)
        Slides
      • 17:30
        L2RF Electronics 15m
        Speaker: Ms Ewa Janas (ISE, Warsaw University of Technology)
        Slides
      • 17:45
        REFM Discussion 1h
    • 18:45 19:00
      Coffe Break 15m
    • 19:00 20:00
      LLRF and Optical Synchronization
      Convener: Dr Frank Ludwig (DESY)
      • 19:00
        TMCB Discussion 1h
        Slides
    • 20:00 22:00
      Party 2h
    • 08:00 09:00
      Breakfast 1h
    • 09:00 11:00
      Software
      • 09:00
        Firmware Framework and Development Overview 15m
        Speaker: Mr Łukasz Butkowski (ISE)
        Slides
      • 09:15
        Improvement of the PCIe communication 15m
        Speaker: Mr Jaroslaw Szewinski (Soltan Institute for Nuclear Studies)
        Slides
      • 09:30
        Partial Reconfiguration 15m
        Speaker: Dr Mariusz Grecki (DESY)
        Slides
      • 09:45
        Common MMC implementation summary 15m
        Speakers: Mr Jaroslaw Szewinski (Soltan Institute for Nuclear Studies), Uros Mavric (DESY)
        Slides
      • 10:00
        AMTF procedures and strategies 15m
        Speaker: Wojciech Cichalewski (TUL-DMCS)
        Slides
      • 10:15
        Software status and next steps 15m
        Speaker: Mr Christian Schmidt (DESY)
        Slides
      • 10:30
        Server development status and resource overview 15m
        Speaker: Mr Adam Piotrowski (Technical University of Lodz, DMCS)
        Slides
      • 10:45
        Further controller upgrades to improve the electron beam quality 15m
        Speaker: Mr Sven Pfeiffer (DESY)
        Slides
    • 11:00 11:15
      Coffe break 15m
    • 11:15 13:00
      Software
      • 11:15
        High level software new topics and discussion 15m
        Speakers: Mr Christian Schmidt (DESY), Julien Branlard (DESY)
        Slides
    • 13:00 14:00
      Lunch 1h